Bathroom Light Fixture Wiring Question...? - hall bath replace tub with shower
I'm trying to replace a lamp in my bathroom 1 / 2. I took the old machine and outside of the wall is a total of 9 thread (3 white, 3 black, 3 Earth). The new camera has 7 cables (3 white, 3 black and 1 ground). I bacisically with 7 connections. I connected each group of blacks and whites separately (6 total) will then combine all the grounds together. Now when I turn on the light bulb bathroom single center Lights (3 lights). This is the strange part. ) In the main bathroom (next to the bathroom with the new lamp, light displays, but if the switch in the bathroom the other two lamps in the bathroom. Instead of each connection, I connect all the white / black IFxture to black, white, middle of the wall, then cover the rest of the wall? Thank you!
Hall Bath Replace Tub With Shower Bathroom Light Fixture Wiring Question...?
3 comments:
Someone has used the light box to a junction box. Two cables (1 black / 1) are white and from the light switch. Two other cable (1 black / 1 white) are a constant performance. The other black and white couple could to other places. Three of the son of the bare copper ground.
An electrician carefully the experiences of persecution and reconnecting the cables between them.
You made a mess! ;-) The new device ... all blacks, whites, and connected to the ignition cable is connected only for the passage of Bad .... other blacks and whites have been / will be installed on other rooms / lights? At this point, you should use a voltmeter to solve it. Here you will find the black and white when the switch is lit bath, read 110/115 volts, and where not rated! ... This hook son pair of black and white in the light of the bathtub. Who is responsible for a dip (of course responsible for the suction is broken connections for connecting the new light, not if you) put up good links ... it is a working light. To the rest of the black son, were likely to be linked, as the whites .... But I gueLassing! And I suppose that this force is through wire black / white or not ON / OFF to the bathroom was a mess on or off! (Just kidding about the disaster, but here you have a mess!)
Someone has used the light box to a junction box. Two cables (1 black / 1) are white and from the light switch. Two other cable (1 black / 1 white) are a constant performance. The other black and white couple could to other places. Three of the son of the bare copper ground.
An electrician carefully the experiences of persecution and reconnecting the cables between them.
Post a Comment